IEC60695 UL746A professional factory lab equipment fire hazard test needle flame tester

Introduction

• Needle Flame Tester reference to IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005..

• AUTO Needle Flame Tester used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector  such as electrical and electronic  equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics

• AUTO Needle Flame Tester with predetermined size (Φ 0.9 mm) needle burner, in 45 °angle burning product,measure the fire risk by  product light-off or holde burning time

 

Needle Flame Tester Technical parameters: 

 

Needle burner	inner hole diameter  Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length  ≥ 35mm, stainless steel
Burner angle	0,°20°, 45°  (adjust flame height)
Thermocouple	Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand  temperature-40°C~ 1100°C
Burning time	0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time	0-999.9 s ± 0.1 s, automatic recording, manual time-out
Flame Height	12mm ± 1mm (with height measurement instruments)
Flame Gas	butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)
Temperature Test Range	0~1000°C
Flame Temperature  Requirements	from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
Standard Copper Block	4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
Test process	automatic control, independent convulsions
Chamber	≥0.5m3
Control	Using single chip microcomputer + touch screen control
Consult standard	GB/T5169.10-2006 , IEC60695-11-5:2000,UL746A
Power Supply	800VA ,220V, 48-60Hz
Display panel language	English(customize available)

 

Pictures Show:





Our services  

 

1. High quality products. 




2. We will take photos of your order before shipment. 




3. Engineering team is professional and will provide you with good after-sales service. 




4. Quality assurance is 1 year.




 




The advantage of our company 

 

1. Engineering team is professional and will provide you with good after-sales service.   




2. Many years of experience in foreign export.




3. Delivery time is fast, and quick respond.




4. We will send a picture of the packaging and product before shipment. 










Management philosophy 

 




1)  Customers are god. We will do our best  to satisfy you.




2)  We will protect our reputation. 




3) The quality is the most important thing.




4) We will bear a strong sense of responsibility. 




 

Looking forward to hearing your inquiry!~Thank you!